Finding the right ramp to move a lawnmower or other equipment into a shed requires a balance of strength, traction, and ease of installation. The following hand-picked ramps are designed to handle riding mowers, ATVs, and heavy lawn gear with load capacities up to 1500 lbs. Each option focuses on anti-slip surfaces, durable construction, and straightforward setup so you can choose confidently for weatherproof outdoor sheds and indoor garages alike.
| Product | Brand | Capacity | Material |
|---|---|---|---|
| VNN 29″ x 48″ Shed Ramp (2PC) | VNN Store | 1500 lbs per pair | Aluminum |
| Stalwart Shed Ramp Set (2x 35.5″) | Stalwart Store | 1200 lbs combined | Metal (steel framing) |
| Gardhom Aluminum Shed Ramps (39×11 in, 2PCS) | gardhom Store | 1500 lbs per pair | Aluminum |
| Toplamper Heavy-Duty Shed Ramp (2PCS) | Toplamper Store | 1500 lbs | Steel |
| Stalwart Steel Ramp Set (2x 17″ tracks) | Stalwart Store | 1200 lbs combined | Steel |
VNN 29″ X 48″ Shed Ramp For Riding Mower
The VNN shed ramp set comprises two 29″ long ramps with a 24″ width and a 2″ height per piece, designed for riding mowers and other lawn equipment. A 12.7° tilt angle enhances traction, aiding smooth ascent onto sheds, garages, or barns. The anti-slip punched plate surface facilitates water drainage and improves grip in all weather. Built from a high-quality alloy iron, these ramps boast up to 1500 lbs per ramp pair, combining robust strength with a lighter weight. Quick installation is possible with pre-drilled holes and only three screws; a portable handle adds mobility for repositioning as needed.
Stalwart Shed Ramp Set (Two 35.5-Inch Ramps)
This two-piece ramp set is designed to move ATVs, motorcycles, or lawn equipment into trailers or sheds. Each ramp handles up to 600 lbs, totaling 1200 lbs when used together. The ramps bolt together for a 17-inch angled track, and feature skid-resistant treads and integrated handles for easy transport. They’re suitable for individual use or paired for heavier loads, offering reliable traction and straightforward setup for shed and trailer loading tasks.
Gardhom Aluminum Shed Ramps 39×11 (2PCS)
These 39″ by 11″ aluminum ramps are designed to accommodate a maximum height of 12″ and come as a durable 2-pack. The ramps weigh approximately 6.71 pounds each and offer a maximum load capacity of 1500 lbs per pair. An anti-slip design with perforated holes increases traction and allows water to drain efficiently, promoting safer transitions for riding mowers and other heavy equipment entering or leaving a shed.
Toplamper Heavy-Duty Shed Ramp (2PCS)
Toplamper’s dual ramp set features a heavy-duty, 1500 lb-rated design with a punch plate anti-slip surface. The ramp is crafted from high-strength steel and comes with pre-drilled installation holes for quick mounting at thresholds up to about 6.5″ high. The 29″ length and 24″ width balance stability and accessibility, making it suitable for riding mowers, small tractors, and snow blowers. The set is intended for permanent or semi-permanent installation in sheds or garages.
Stalwart Steel Ramp Set for ATVs & Mowers
This steel ramp set delivers a robust 1200 lbs combined capacity across two ramps, designed for ATVs, motorcycles, or mowers. The ramps feature skid-resistant tread and angled foot plates for smooth transitions. Each ramp weighs around 9 lbs and includes integrated handles, facilitating portability and on-the-go loading for shed or trailer use.
Buying Guide: Key Considerations For Choosing A Lawn Mower Ramp For A Shed
Load capacity: Select ramps with a buffer above the weight of your heaviest equipment. Look for models rated at least 1500 lbs per pair for riding mowers or snow blowers, and ensure the combined capacity when using two ramps meets or exceeds the weight of the vehicle.
Material and corrosion resistance: Aluminum ramps are lightweight and rust-resistant, ideal for outdoor sheds. Steel ramps offer high strength but may require treatment to resist corrosion in damp environments.
Grip and traction: Anti-slip surfaces, perforated or punched plate textures, and drainage channels reduce the risk of slips in wet or muddy conditions. Check for tread depth and surface pattern to maximize grip during loading and unloading.
Angle and ramp dimensions: A lower angle reduces effort required to ascend, but longer ramps can take up more space. Verify length, width, and height clearance in your shed opening. A 12°–15° tilt is common for lawn equipment, but confirm alignment with your shed threshold.
Ease of installation: Pre-drilled holes, included mounting hardware, and portability features (handles or light-weight design) save installation time. Some sets allow bolting together for a wider track or longer ramp length.
Compatibility: Ensure the ramps accommodate your specific equipment width and wheelbase. Check the ramp surface’s compatibility with rubber tires and mower blades to avoid damage during loading.
Storage and portability: If you’ll store ramps in the shed when not in use, consider foldable or modular designs, or lightweight aluminum options for easier handling and space management.